Charlie Wilson wrote: ↑Sun Apr 09, 2017 7:13 pm
Erwin your amp sounds great. I am curious, you have a 8 ohm speaker, so you are running a 4 ohm OT in to an 8 ohm load? I know this is common in Dumbles but I haven't really liked the sound of that. However, your amp sounds good(I have a 1970 NOS Fender Twin OT waiting in the wings). Also, I know there are some issues with the layout. I think the bass pot needs a 10k tail to ground and you mentioned the jazz/rock switch. Do you remember what the other issues are? I think I seem to remember that the OD relay wasn't correct.
CW
CW, IIRC the issues surround the OD was the way JB laid out his relay board which was different from HAD. It's been years since I have looked inside mine, but I have either a 1.8 or 3.3k hanging off the bass pot and a few other changes as well.
erwin_ve wrote: ↑Wed Mar 29, 2017 2:59 pm
Everything is installed and finished!
The speaker is a Fane Studio 12L I had bought in 2010. Last year I tried to sell this speaker, noone interested
Glad I kept it, super nice speaker, slightly less mids compared to EVM12L but enough bottom end for a combo cab.
I tried to lower the 1M at the OD entrance but it went to the fuzzy side.
Overall the amp is bright but not too bright, really balanced and mature.
The overdrive is super smooth and not so mid heavy compared to the later generation designs IMO.
It also has a nice sustain especially with the FET engaged!
The NFB is 3K3 but that is going to be 5K. I can really open up the presence without getting icepicky.
So far this is my favourite amp, it's super versatile and none of my guitars sounds flubby or congested with this design.
Having this amp over a year now, it's a blast to play it in a live setting. Right now a 335 guitar is my favourite with the 2nd gen hybrid.
Here is a live recording
erwin_ve wrote: ↑Sun Jul 22, 2018 8:08 pm
Having this amp over a year now, it's a blast to play it in a live setting. Right now a 335 guitar is my favourite with the 2nd gen hybrid.
Here is a live recording[youtube].https://youtu.be/SZblHm2r2WI[/youtube]
Sounds great!
I've never owned an ES model guitar before, but I have had my eye on an ES-339 for a while now.
the youtube tag is a bit weird, it just want's your last part of the video like this: SZblHm2r2WI
instead of the full link, then you wrap it with the youtube tag. The newer 'video' tag is much better and works for many video types and you just provide the URL.
erwin_ve wrote: ↑Sun Jul 22, 2018 8:08 pm
Having this amp over a year now, it's a blast to play it in a live setting. Right now a 335 guitar is my favourite with the 2nd gen hybrid.
Here is a live recording
Hi erwin_ve,
I am extremely curious and am considering building this project. I built a 50W JM and it is one of my favorite amp for clean tone, probably the best I've played or built.
I feel the lack of serious OD and I could add a good pedal to the front but I would also like to build an amp that has the JM cleans and OD of the early Dumble, when his designs were still Fender children.
Do you think this 2nd gen hybrid is what I'm looking for ?.
Unfortunately YouTube has deleted your demo which I would have liked to hear.
Thanks for your help.