86Special MiniHRM faceplate DXF file layout schemo and BOM

[rogb]

Please download and use
The faceplate and rear panel is for a 12x2 panel


DXF is not allowed for some reason so I have renamed it to .txt.

Download and rename to .dxf

29th March '11 - I have revised the rear panel as I forgot the OD Master on the front, no matter as there wasn't much room there, so it is on the back now along with an HRM lift switch.

Cheers
Roger

[ampbldr2]

Can you post the schematic and layout here too?
Maybe put a sticky on this as well.

[rogb]

Can you post the schematic and layout here too?
Maybe put a sticky on this as well.

Sure I'll put up what I got.

I am working on a Visio layout (a la Talbany (thanks Tony)) of the final working amp as I have built it.

[dreric]

This is the layout for the 86 Special.

Here's the original discussion of the MT HRM AX84. There is a layout on page three or so.

Eric

[rogb]

See the second attachment? - it is for the original miniHRM
I think I have covered all the evolutions here, except for the 5879.

I have one of those tubes ready in case the EF86 proves to be too microphonic in the combo cab. The socket is mounted on O rings though, and I have some at the ready to damp the glass container!