Univox U305R Reverb Tank
Moderators: pompeiisneaks, Colossal
Univox U305R Reverb Tank
I need a new reverb tank for my Univox U305R. The reverb is capacitance coupled and is marked "1.5K Driver" and "Pickup".
-
- Posts: 156
- Joined: Thu Jun 07, 2007 12:53 am
- Location: Silver City, New Mexico
Re: Univox U305R Reverb Tank
AES had a pretty good article on their site on how to identify tanks. Beside the impedance chart, they listed DCR values of the coils.
Re: Univox U305R Reverb Tank
No and it is not a Acutronics tank
Re: Univox U305R Reverb Tank
Regardless of who made the tank originally, you don't much choice now but Accutronics/Belton or MOD. "F" type tanks (1K5 input impedance) do still seem to be available, so unless you want to radically mod the amp, that's the only way to go.
Re: Univox U305R Reverb Tank
you might be able to rebuild your old tank.
My Daughter Build Stone Henge
Re: Univox U305R Reverb Tank
Like the poster noted earlier http://tubesandmore.com/ has a good reference for tanks.
You do not have the required permissions to view the files attached to this post.
Re: Univox U305R Reverb Tank
Here is the information that I have:
EAV-200D is the tank number.
13.25" in length
2 Springs
1.5K Driver
EAV-200D is the tank number.
13.25" in length
2 Springs
1.5K Driver