These are the original circuits, on a same-size board that fits the original mountings, but with the wiring made sane by placing all the wire connections on the edge next to the controls so they can be serviced. The preliminary documentation is on the index page at geofex.com.
Installation consists of clipping off all the old wires at the controls / switches / etc. and removing the old board, then soldering in the new (short, direct, not-in-laced-bundles) wires to the controls.
This worked well enough that I'm putting the finishing touches on a similar board for the Cambridge/Berkeley2/Pacemaker/Pathfinder and Berkeley 3.
The idea here is to keep Thomas Vox amps out of the dumpster.
![Very Happy :D](./images/smilies/icon_biggrin.gif)