Real quick since this it my first post... thank you to everyone for all the amazing help here. I would never have been able to build this thing in a million years without the insane amount of knowledge you all openly share. I'm hooked now and already have another 3 amps I want to build next
![Laughing :lol:](./images/smilies/icon_lol.gif)
I just finished my first amp build ever and after a few troubleshooting issues it's sounding pretty good!
The only weird thing left is that I'm still measuring around 50ish plus volts above the schematic at each of the listed power supply section voltages.
I'm likely missing something obvious but the only thing before the power section board is the rectifier board and the transform/choke... so I can't figure out what could cause these to be high. I double checked all the resistors in the power section and they're accurate.
Is there a reason could this be 50v higher than expected? I've double checked the amp a few times and think it is wired correctly but can't figure out why these could be high.
Here's a chart of the voltages: