Synergy SYN-2 Rack Mount Preamp power transformer spec
Moderators: pompeiisneaks, Colossal
Synergy SYN-2 Rack Mount Preamp power transformer spec
Hello, guys. Is someone has Synergy SYN-2 Rack Mount Preamp power transformer spec ? Thanks
-
Stevem
- Posts: 4985
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Synergy SYN-2 Rack Mount Preamp power transformer spec
I’am sure Synergy does. How about shooting them a email?
Actually if this unit is only 1 rack space tall I would be surprised if it had no power transformer, but a switching type power supply.
Actually if this unit is only 1 rack space tall I would be surprised if it had no power transformer, but a switching type power supply.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Synergy SYN-2 Rack Mount Preamp power transformer spec
Thanks for your reply.
They use Toroidal Transformer.
They use Toroidal Transformer.
Re: Synergy SYN-2 Rack Mount Preamp power transformer spec
I have been happy with the Antek toriodal transformers. The 50VA units (at least the ones I have used will fit into a 1U chassis, just barely) Something like this; https://www.antekinc.com/as-05t200-50va ... ansformer/
The pic below is from a 6G15 reverb that I built into a standard Fender chassis & mounted all the transformers internally to keep them away from the reverb tank. Very quiet.
The pic below is from a 6G15 reverb that I built into a standard Fender chassis & mounted all the transformers internally to keep them away from the reverb tank. Very quiet.
You do not have the required permissions to view the files attached to this post.