Here are the 3 different Output's I have (Left) 4200 (ac30) output/heyboer
(middle) 5200Heyboer, Right 6600 Heyboer all 30-35 watts.
Ley me know if this works!!!!
Chris
One question though, what is the measurement of the lamination on the front of the amp?
I thought the lamination was the same size and the height of the chassis. Of course I could be wrong.
Yours Sincerely
Mark Abbott.
Hi Mark,
Thank-you!!!!! the measurements are 2-3/4" x 19",I don't know if this is exact as my cabs are slightly larger than a standard wreck, I think.......If you look at some of the photo's on-line it appears from the back that the front face slides into a track on the front panel ,making the face plate bigger than the chassis,anyway the cabs were built about 2 years ago.......long before you and Matt T. did all the leg work on the great info we now have!!!!!
Thank-you Mark!!!!
Chris
Did you build it using the schematics in the Files section?
Omar
Thank-you Omar!!!!!!!
I do have an internal shot to post will try later to up-load
No clips of either amp at the moment
All the work ,with the exception of the cab and face plate was done with info gathered by Mark Abbott and Matt Taylor... All contained here on our site!!!!!!
Thank-you!!!!
Chris