Hello All!
I'm new to this forum.
I have a 70's Twin w/Master Vol and Bal controls that I've Bandmastered. Hold your fire! LOL I had the X'formers for a Bandmaster and mounted them in the Twin chassis that someone else stripped down and removed the B+. I built a Torres B+ and replaced a lot of the resistors with PRP or Koa and caps where needed. I don't need 100W or even 50W..! Too loud for me.
I also have a 69-70 Siverface Princeton on the way to use for small gigs.
I don't want an amp with a lot of excess boards, relays, etc. So...what's my best option to "Dumble" them? I have a selection of early 90's tubes I've had laying around ....all NOS. Sovtec 6L6GB(10), Sovtec 5881(6), Ruby tubes EL34G(2), Tesla EL34(2)... but I could dump them on ebay and purchase other tubes.
I like a clean....clear.....natural tone on one hand and a driving smooth OD for some leads. I have an Allen PR cab with a EV12L (late 70's..low hours) and was also considering a Weber 12F150 or Cermaic Chicago.
Recommendations on a Dumble circuit?
Fender Rework to Dumble
Moderators: pompeiisneaks, Colossal
Re: Fender Rework to Dumble
post questions in the forum not in the files archive
My Daughter Build Stone Henge
- robinbowes
- Posts: 7
- Joined: Thu Feb 03, 2011 9:53 pm
- Location: York, UK
- Contact:
Re: Fender Rework to Dumble
Ooooh, I have pretty much the same question.
Let's hope the OP did indeed ask the same question in the forum...
R.
Let's hope the OP did indeed ask the same question in the forum...
R.
Re: Fender Rework to Dumble
Tom
Don't let that smoke out!
Don't let that smoke out!
- robinbowes
- Posts: 7
- Joined: Thu Feb 03, 2011 9:53 pm
- Location: York, UK
- Contact:
Re: Fender Rework to Dumble
Yes, I found it, eventually!
Thanks.
R.
Thanks.
R.