New JTM50 build - Thank You Jelle!
Moderators: pompeiisneaks, Colossal
New JTM50 build - Thank You Jelle!
Finished up a project that I started 3-4 years ago. For whatever reason I got very lazy as far as amp building is concerned. I have started a number of projects and then lost interest in them so they sat incomplete. This is one of them. I had the chance to hang with Jelle and we all but finished it. I had to finish the center tap for the heaters and the common for the line voltage.
Fired it up last night took some voltages and set the bias. Had an issue with the impedance selector wiring and had to re-wire it. I thought it was a bad OT and tacked in an Asteroid 60 OT that I have here (hence the other thread asking about the wire colors for that OT - Thanks again Mark). Anyway, it worked with the Asteroid OT. After it worked with Asteroid OT I soldered in the original again without the selector and it worked so I re-installed the selector and lo and behold it sounds like a Marshall. I need to do some tweaking so with the selector issue plus the tweaking stage it is still a bit messy in there. And yes that is diode recto's in series with a 5AR4.
A big Thank You to Jelle Welagen for pushing me and helping to get it done
Fired it up last night took some voltages and set the bias. Had an issue with the impedance selector wiring and had to re-wire it. I thought it was a bad OT and tacked in an Asteroid 60 OT that I have here (hence the other thread asking about the wire colors for that OT - Thanks again Mark). Anyway, it worked with the Asteroid OT. After it worked with Asteroid OT I soldered in the original again without the selector and it worked so I re-installed the selector and lo and behold it sounds like a Marshall. I need to do some tweaking so with the selector issue plus the tweaking stage it is still a bit messy in there. And yes that is diode recto's in series with a 5AR4.
A big Thank You to Jelle Welagen for pushing me and helping to get it done
You do not have the required permissions to view the files attached to this post.
Re: New JTM50 build - Thank You Jelle!
Nicely done I like it.
- Littlewyan
- Posts: 1918
- Joined: Thu Sep 12, 2013 6:50 pm
- Location: UK
Re: New JTM50 build - Thank You Jelle!
Very nice, i like it i like it a lot . I see you left yourself space on the board for moving to a spilt cathode arrangement if you wanted in future, good plan. Love how these amps can so easily be transformed into later models, so many options! I really really really want to build myself one of these but at the moment am having a hard time justifying the cost as my band isn't currently gigging. But one day!
- statorvane
- Posts: 557
- Joined: Thu May 11, 2006 3:28 pm
- Location: Upstate New York
Re: New JTM50 build - Thank You Jelle!
Way cool
I like the option of switching between split/shared cathode, but usually wind up leaving it split.
I like the option of switching between split/shared cathode, but usually wind up leaving it split.
- Reeltarded
- Posts: 9962
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: New JTM50 build - Thank You Jelle!
Looks great, buddy!
Unintelligible too loud over phone or it didn't happen.
Unintelligible too loud over phone or it didn't happen.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: New JTM50 build - Thank You Jelle!
Looks good to me. A nice addition to anyone's arsenal.
Series diodes are a good idea. A very good idea.
Well done.
Series diodes are a good idea. A very good idea.
Well done.
Why Aye Man
Re: New JTM50 build - Thank You Jelle!
Well done, Greg! Looks purdy.
I use diodes with my recto tube also, though I use two UF5408s mounted right on the tube socket.
What are you going to finish up next?
Greg
I use diodes with my recto tube also, though I use two UF5408s mounted right on the tube socket.
What are you going to finish up next?
Greg
Re: New JTM50 build - Thank You Jelle!
Very, very nice.
Re: New JTM50 build - Thank You Jelle!
Nice!
Love that tolex! Blondes have more fun!
Love that tolex! Blondes have more fun!
Re: New JTM50 build - Thank You Jelle!
Hmmm.. .022uf couplers...no bright cap on the high treble volume control?
Re: New JTM50 build - Thank You Jelle!
Actually I had the bright cap in. I took it out trying to find an issue and haven't put it back in yet. I am in tweaking phase now so things will changeRCGPNY1 wrote:Hmmm.. .022uf couplers...no bright cap on the high treble volume control?
Re: New JTM50 build - Thank You Jelle!
Hey, you never told me it was a blonde!
- Reeltarded
- Posts: 9962
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: New JTM50 build - Thank You Jelle!
C'mon lesshearit!
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: New JTM50 build - Thank You Jelle!
Are you brewing Kombucha back there on the kitchen counter??????
Tempus edax rerum
-
- Posts: 208
- Joined: Fri Feb 24, 2006 11:29 am
- Location: Vleuten, The Netherlands
- Contact:
Re: New JTM50 build - Thank You Jelle!
nice!
got a JTM50 PA in my shop right now waiting on some TLC and a new PT....
got a JTM50 PA in my shop right now waiting on some TLC and a new PT....
Chris
Love, peace & loudness!
Love, peace & loudness!