Like a fool when I cut the wires I didn't mark or record which of the reverb tranny's pins the return is wired to. The schematics are enigmatic.
Anyone know or have a gut shot of the reverb tranny on a 4210 or 2205?
Russ
Reconnecting reverb wiring to a Marshall 4210
Moderators: pompeiisneaks, Colossal
-
- Posts: 4609
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Reconnecting reverb wiring to a Marshall 4210
There is not a red and Blue wire off of the reverb driver trans, as that is the primary / high voltage side.
The primary side will also test out at a far higher resistance then the secondary side.
The primary side will also test out at a far higher resistance then the secondary side.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Reconnecting reverb wiring to a Marshall 4210
Hi Steve,
Can you translate that into electronic dumb ass for me?
Russ
-
- Posts: 4609
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Reconnecting reverb wiring to a Marshall 4210
Are you taking about the reverb pan and questioning which end / cable is the return side?
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Reconnecting reverb wiring to a Marshall 4210
Hi Steve,
I'm looking for which tap on the Reverb tranny the return wire is connected to. I took a pic when I bought it but can 't see where the wire goes.
Thanks for your help!
Russ
I'm looking for which tap on the Reverb tranny the return wire is connected to. I took a pic when I bought it but can 't see where the wire goes.
Thanks for your help!
Russ
- martin manning
- Posts: 13355
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
1 others liked this
Re: Reconnecting reverb wiring to a Marshall 4210
Here's a 2959 Lead with the same transformer. I'd guess the red lead goes to the PI node and the blue to the driver tube plate. The coax goes to the reverb tank input.
Link: http://www.marshallforum.com/threads/ma ... 00w.95834/
Link: http://www.marshallforum.com/threads/ma ... 00w.95834/
You do not have the required permissions to view the files attached to this post.
Re: Reconnecting reverb wiring to a Marshall 4210
Hi Martin,
Thank you, that's what I need!
Russ
Thank you, that's what I need!
Russ
-
- Posts: 4609
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Reconnecting reverb wiring to a Marshall 4210
The first rule for taking anything apart that you are not intimately familiar with is making notes my friend!
Many times the 2 minutes spent doing such saves hours!
Many times the 2 minutes spent doing such saves hours!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Reconnecting reverb wiring to a Marshall 4210
Taking notes and lots of high resolution photos prior to taking things apart OR modifying/changing anything,