Don't forget vinyl decals as a nice way to customize your builds. I just got this vinyl cut at a local shop, and applied it to my footswitch and travel case:
Vinyl decals
Moderators: pompeiisneaks, Colossal
Vinyl decals
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Re: Vinyl decals
Do you use qny kind of adhesive or a clear spray over that?
Re: Vinyl decals
The vinyl is self adhesive. This is the stuff used on shop windows. It will stay put. You'd have to spray a HEAVY coat of clear to make any difference.
I build and repair tube amps. http://amps.monkeymatic.com
-
- Posts: 1038
- Joined: Wed Mar 15, 2017 12:08 pm
- Location: So Paris, France
1 others liked this
Re: Vinyl decals
Thx for the idea!
(but I already noted it ;-)
PS : your amp builds are truely amazing!
(but I already noted it ;-)
PS : your amp builds are truely amazing!
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: Vinyl decals
this is a vinyl decal stuck straight on to the chassis
I've used them for all my 'Dumble' builds.
Still wearing well after a couple of years of abuse.
Marcus
I've used them for all my 'Dumble' builds.
Still wearing well after a couple of years of abuse.
Marcus
You do not have the required permissions to view the files attached to this post.
Re: Vinyl decals
Where do you get those done marcus?
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: Vinyl decals
I just got a local print shop to do it. Hard bit is doing the design/measurements accurately first , I got my graphics designer who does a lot of my CD artwork to do it
you have to have a whole sheet done so I ended up with about 6 of these on a small sheet of vinyl. Cost about £35-40 I think.
Marcus
you have to have a whole sheet done so I ended up with about 6 of these on a small sheet of vinyl. Cost about £35-40 I think.
Marcus
Re: Vinyl decals
Thanks marcus
Terry
Terry