I am building a 15w matchless based amp, 2 channel, one spitfire, one nighthawk. I have a Hammond 159P already ordered BUT I found this:
https://www.rfparts.com/20c54.html
$20 seems like a steal for that choke. The two are very close in spec 8H 150mA for the Thordarson and 10H 125mA for the Hammond. Hammond is open, the Thor is a bit prettier. I am trying to have this be a really high spec/top of the line build.
Opinions please
Thanks!!
Choke selection help
Moderators: pompeiisneaks, Colossal
Re: Choke selection help
The dc resistance is important
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
Re: Choke selection help
One is 145ohms, the other is 155 ohms, I'm going to just stick with the hammond since it's already ordered and on its way. I can make things more complicated then I need to at times