CUSTOM FRONT/BACK PANEL MAKERS
Moderators: pompeiisneaks, Colossal
CUSTOM FRONT/BACK PANEL MAKERS
I thought I'd ask if anyone knows of a good custom front/back panel maker for a Valvestorm project chassis build? Thanks.
Just plug it in, man.
- dorrisant
- Posts: 2636
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
1 others liked this
Re: CUSTOM FRONT/BACK PANEL MAKERS
I can do it. What do you have in mind? Of course I'd have to have the dimensions...
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: CUSTOM FRONT/BACK PANEL MAKERS
I ended up using front panel design. I mainly used them because i wanted some uv printing done to the panels plus engraving. You can make the printed part in something like affinity or adobe then use the fpd software for the engraving and holes. The fpd software lets you import the graphic you made to be printed so it can be anyway you want it. They are expensive though but the panels came out great imo.
You do not have the required permissions to view the files attached to this post.
- romberg
- Posts: 503
- Joined: Wed Nov 28, 2007 6:10 am
- Location: Lafayette, CO
- Contact:
2 others liked this
Re: CUSTOM FRONT/BACK PANEL MAKERS
I've used Precision Design to make faceplates for many custom amps I've built. Sandy is very fast and has been able to do lots of custom things I did not think possible:
http://www.precisiondesignin.com/
Mike
http://www.precisiondesignin.com/
Mike
Re: CUSTOM FRONT/BACK PANEL MAKERS
I think they all have the same machines these days: CO2 lasers, dye-sub printers, etc.
I build and repair tube amps. http://amps.monkeymatic.com
Re: CUSTOM FRONT/BACK PANEL MAKERS
Do any Australian members have any recommendations for Panel Makers in Oz?
Getting panels done in the US, or anywhere else, is too expensive now that our Au$ is crashing and international postage (from anywhere to Oz) is too costly also.
Getting panels done in the US, or anywhere else, is too expensive now that our Au$ is crashing and international postage (from anywhere to Oz) is too costly also.
Re: CUSTOM FRONT/BACK PANEL MAKERS
Can u do front/back panels that works to order from TT
https://www.tube-town.net/cms/?TT_LaserShop/Quickstart
- dorrisant
- Posts: 2636
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
1 others liked this
Re: CUSTOM FRONT/BACK PANEL MAKERS
zvenamp wrote: ↑Fri May 15, 2020 7:23 amCan u do front/back panels that works to order from TT
https://www.tube-town.net/cms/?TT_LaserShop/Quickstart
Yes. PM me.
"Education is what you're left with after you have forgotten what you have learned" - Enzo