2021 Monkeymatic Fiddy 800
Moderators: pompeiisneaks, Colossal
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
1 others liked this
Re: 2021 Monkeymatic Fiddy 800
Lovely build. Love way you've used the radial electrolytic caps
heresy!!!! you haven't twisted your heater wires.......
M
heresy!!!! you haven't twisted your heater wires.......
M
Re: 2021 Monkeymatic Fiddy 800
Well, that's not looking too bad, probably likely. Solid pine cabinet with reclaimed '60s Hammond organ music stand.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Re: 2021 Monkeymatic Fiddy 800
Beautiful as always!
I like the handle on the one side look. The room must have smelled great when you where cutting the pine.
I love that smell.
Cheers
G
I like the handle on the one side look. The room must have smelled great when you where cutting the pine.
I love that smell.
Cheers
G
Re: 2021 Monkeymatic Fiddy 800
Yes, the pine smelled great! But the vinyl smelled like chemical death.
I build and repair tube amps. http://amps.monkeymatic.com
Re: 2021 Monkeymatic Fiddy 800
Where do you source the larger 25k trim pots?
Ange
Ange
Re: 2021 Monkeymatic Fiddy 800
I build and repair tube amps. http://amps.monkeymatic.com
Re: 2021 Monkeymatic Fiddy 800
You da man - thanks
Re: 2021 Monkeymatic Fiddy 800
Faceplate arrived! Glamour shots! (Final layout updated in post #1, above.)
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
- Colossal
- Posts: 5059
- Joined: Sat Oct 20, 2007 9:04 pm
- Location: Moving through Kashmir
1 others liked this
Re: 2021 Monkeymatic Fiddy 800
Very nice!
Re: 2021 Monkeymatic Fiddy 800
Lovely looking amp, bet it sounds great too.
- pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
1 others liked this
Re: 2021 Monkeymatic Fiddy 800
The heaters are that relaxed mode, so no issues there? Have you moved away from the tight twist variant for all your builds?