How to replace the lamp assembly on vintage Brown/Black face amps?
Moderators: pompeiisneaks, Colossal
Re: How to replace the lamp assembly on vintage Brown/Black face amps?
I suspect there are many more of us that have used the electricians trick than those that have a proper wrench.
Re: How to replace the lamp assembly on vintage Brown/Black face amps?
I never seem to have trouble getting the old one loosened to remove it, but getting the new one tighten up nicely has always been difficult. Various pliers to creep it has always done the trick but it sure is a test of patience.
Re: How to replace the lamp assembly on vintage Brown/Black face amps?
I want to use a spanner on a nut. The hammer and punch/screwdriver can only cause damage.
Yours Sincerely
Mark Abbott
Mark Abbott
-
- Posts: 18
- Joined: Mon Sep 29, 2008 3:37 pm
4 others liked this
Re: How to replace the lamp assembly on vintage Brown/Black face amps?
I know this is a old thread but I found and purchased an offset wrench for Fender Amps.
www.tonecraftaudio.com in La Jolla CA. $15.50 w/shipping in U.S.
Hope this helps.
www.tonecraftaudio.com in La Jolla CA. $15.50 w/shipping in U.S.
Hope this helps.
You do not have the required permissions to view the files attached to this post.
Re: How to replace the lamp assembly on vintage Brown/Black face amps?
Bruce from Mission Amps offered a very nice offset purpose-made wrench many years ago. Good to see there is another option now.