MALT...
Thanks for the plug... I have 250K Mil-Spec RV4NAYSD254 in stock
for $2.50 ea. they are Linear Taper
Also have Allen-Bradley RV4 type in the 100K's also at $2.50
And a Reon 30K RV 4 type longer shaft also at $2.50.
Also a 500K reverse log taper RV4 type Mil spec $2.50ea
I have smaller quantities in other values too. Just email me
Only the 250K's are listed on my website. www.apexjr.com
Steve @ Apex Jr.
steve.apexjr@prodigy.net
Clarostat pots
Moderators: pompeiisneaks, Colossal
Re: Clarostat pots
Good to know!ApexJr. wrote:MALT...
Thanks for the plug... I have 250K Mil-Spec RV4NAYSD254 in stock
for $2.50 ea. they are Linear Taper
Also have Allen-Bradley RV4 type in the 100K's also at $2.50
And a Reon 30K RV 4 type longer shaft also at $2.50.
Also a 500K reverse log taper RV4 type Mil spec $2.50ea
I have smaller quantities in other values too. Just email me
Only the 250K's are listed on my website. www.apexjr.com
Steve @ Apex Jr.
steve.apexjr@prodigy.net
david
Re: Clarostat pots
Looks like there are several manufacturors of the RV4 pot then? I thought it was a Clarostat pot only.
I see that digikey sells RV4 too, but they are carbon, not conductive plastic though..
Tommy
I see that digikey sells RV4 too, but they are carbon, not conductive plastic though..
Tommy
Re: Clarostat pots
RV4 is a military number for a spec they have. There are a
few manufacturers of this number. That's why there so expensive.
They are all carbon pots...
Steve @ Apex Jr.
few manufacturers of this number. That's why there so expensive.
They are all carbon pots...
Steve @ Apex Jr.
Re: Clarostat pots
OK.. The plastic pots at westlabs are 53c3 then I guess...
Tommy
Tommy
Re: Clarostat pots
Is there really a tonal difference between Alpha - PEC - Clarostat? There is such a significant price diff from Alpha to the others, it really has me wondering if it's worth it.
Re: Clarostat pots
Probably not much tonal difference, but mechanical difference.. Less noise..or more consistant maybe...
Tommy
Tommy
Re: Clarostat pots
No, you can't solder to them.NitroLiq wrote:Can you solder to the backs of the Clarostats