New ReleaSSSes
Moderators: pompeiisneaks, Colossal
Re: New ReleaSSSes
It would be just like him to throw an inductor in just to mess with cloners.
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: New ReleaSSSes
Get it right..............."Bootleggers"Structo wrote:It would be just like him to throw an inductor in just to mess with cloners.
TM
Re: New ReleaSSSes
My SSS chassis #004 style was already drilled for board over the preamp tubes so PTP is the way I am going.
Here is what I have come up with so far, which may change
Rev1 for reverb added.
Not sure about PI and Driver.
Or for those with tubes all in a row and want one large board it gets wild figuring out the best component layout to use. lol:
Mark
Here is what I have come up with so far, which may change
Rev1 for reverb added.
Not sure about PI and Driver.
Or for those with tubes all in a row and want one large board it gets wild figuring out the best component layout to use. lol:
Mark
You do not have the required permissions to view the files attached to this post.
Last edited by M Fowler on Tue Oct 30, 2012 4:16 am, edited 2 times in total.
- FUCHSAUDIO
- Posts: 1247
- Joined: Fri Apr 08, 2005 2:48 pm
- Location: New Jersey (you got a problem with that ?)
- Contact:
Re: New ReleaSSSes
Some are (proudly) "pure evil incarnate"ToneMerc wrote:Get it right..............."Bootleggers"Structo wrote:It would be just like him to throw an inductor in just to mess with cloners.
TM
Proud holder of US Patent # 7336165.
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: New ReleaSSSes
Nice job MarkM Fowler wrote:My SSS chassis was already drilled for board over the preamp tubes so PTP is the way I am going.
Here is what I have come up with so far, which may change
Rev1 for reverb added.
Not sure about PI and Driver.
Mark
Looks great
Darin
Re: New ReleaSSSes
Darin I just need to build it and then come back with corrected versions I'm sure.
I'm going to build the power amp first using the power amp in jack. Then get the pre-amp done.
Wish me luck.
Mark
I'm going to build the power amp first using the power amp in jack. Then get the pre-amp done.
Wish me luck.
Mark
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: New ReleaSSSes
I believe you will get it...M Fowler wrote:Darin I just need to build it and then come back with corrected versions I'm sure.
I'm going to build the power amp first using the power amp in jack. Then get the pre-amp done.
Wish me luck.
Mark
I'm sure the tweaking will be fun also.
Darin
Re: New ReleaSSSes
Looks great Mark. I'm looking forward to seeing your progress.M Fowler wrote:Darin I just need to build it and then come back with corrected versions I'm sure.
I'm going to build the power amp first using the power amp in jack. Then get the pre-amp done.
Wish me luck.
Mark
-
- Posts: 1105
- Joined: Tue Feb 07, 2006 4:52 am
SOund clips
Any sound clips of your amp?? Be fun to take a listen!David Root wrote:I used a Fasel yellow inductor. Measures between 0.6 and 0.7 H on my LCR meter, depending on the frequency used. (120Hz & 1 KHz)
jim
soundclips from ceriatone SSS
Here are a few soundclips from my SSS. Still learning the amp but really loving it. These are with an alex attenuator. The first clip is with a King of tone as a clean boost, an Analogman Comprossor, and a timeline in the loop. Second clip has timeline in loop as well. I'm switching back and forth between an Aluminum Falcon and a Monsterpiece Stud to illustrate differences (I start with the AF on and then yell in the background everytime I change). The third Clip is just some random noodling with the aluminum falcon and a grosh strat.
http://soundcloud.com/bigwebb83/ceriato ... dling-with
http://soundcloud.com/bigwebb83/aluminum-falcon-vs
http://soundcloud.com/bigwebb83/ceriato ... ing-with-1
http://soundcloud.com/bigwebb83/ceriato ... dling-with
http://soundcloud.com/bigwebb83/aluminum-falcon-vs
http://soundcloud.com/bigwebb83/ceriato ... ing-with-1
-
- Posts: 1105
- Joined: Tue Feb 07, 2006 4:52 am
Re: soundclips from ceriatone SSS
pretty close to the kaiser SSS where Doppler is a playing it! Throw a eric johnson fuzz and a tube screamer in front of it, and let us hear that!bigwebb83 wrote:Here are a few soundclips from my SSS. Still learning the amp but really loving it. These are with an alex attenuator. The first clip is with a King of tone as a clean boost, an Analogman Comprossor, and a timeline in the loop. Second clip has timeline in loop as well. I'm switching back and forth between an Aluminum Falcon and a Monsterpiece Stud to illustrate differences (I start with the AF on and then yell in the background everytime I change). The third Clip is just some random noodling with the aluminum falcon and a grosh strat.
http://soundcloud.com/bigwebb83/ceriato ... dling-with
http://soundcloud.com/bigwebb83/aluminum-falcon-vs
http://soundcloud.com/bigwebb83/ceriato ... ing-with-1
Re: New ReleaSSSes
Bigwebb do you have a clip with the amp cranked more so I can hear it distort or lead runs?
Mark
Mark
Re: New ReleaSSSes
The preamp is at 2 o'clock and the master is around noon on most of those. I suppose I could dime it with the attenuator tonight and make a clip. With the attenuator fully involved though it does stiffle the clarity a tad.
Re: soundclips from ceriatone SSS
groovtubin wrote:pretty close to the kaiser SSS where Doppler is a playing it! Throw a eric johnson fuzz and a tube screamer in front of it, and let us hear that!bigwebb83 wrote:Here are a few soundclips from my SSS. Still learning the amp but really loving it. These are with an alex attenuator. The first clip is with a King of tone as a clean boost, an Analogman Comprossor, and a timeline in the loop. Second clip has timeline in loop as well. I'm switching back and forth between an Aluminum Falcon and a Monsterpiece Stud to illustrate differences (I start with the AF on and then yell in the background everytime I change). The third Clip is just some random noodling with the aluminum falcon and a grosh strat.
http://soundcloud.com/bigwebb83/ceriato ... dling-with
http://soundcloud.com/bigwebb83/aluminum-falcon-vs
http://soundcloud.com/bigwebb83/ceriato ... ing-with-1
I love that clip. I'll post one later with a tube screamer in front. Oddly enough the high end TS808HW doesn't have enough grind to get the sound that doug was getting on that clip. Wish I had a REAL 808. My Keeley Reissue will have to do.
-
- Posts: 1105
- Joined: Tue Feb 07, 2006 4:52 am
Re: soundclips from ceriatone SSS
I`ve converted a quad reverb, single channel, cath follower reverb mix set, and done that, it is INSANE, really close to EJ`s stuff!! PM me, may have something for you!bigwebb83 wrote:groovtubin wrote:pretty close to the kaiser SSS where Doppler is a playing it! Throw a eric johnson fuzz and a tube screamer in front of it, and let us hear that!bigwebb83 wrote:Here are a few soundclips from my SSS. Still learning the amp but really loving it. These are with an alex attenuator. The first clip is with a King of tone as a clean boost, an Analogman Comprossor, and a timeline in the loop. Second clip has timeline in loop as well. I'm switching back and forth between an Aluminum Falcon and a Monsterpiece Stud to illustrate differences (I start with the AF on and then yell in the background everytime I change). The third Clip is just some random noodling with the aluminum falcon and a grosh strat.
http://soundcloud.com/bigwebb83/ceriato ... dling-with
http://soundcloud.com/bigwebb83/aluminum-falcon-vs
http://soundcloud.com/bigwebb83/ceriato ... ing-with-1
I love that clip. I'll post one later with a tube screamer in front. Oddly enough the high end TS808HW doesn't have enough grind to get the sound that doug was getting on that clip. Wish I had a REAL 808. My Keeley Reissue will have to do.
jim