Some bluesmaster PI questions

[dogears]

The effect of decoupling the PI, for me, seems to be more important than the voltage. Although, maybe do a 2.2K since your B+ is on the low side.

Sorry, I may have to ask this question again as it seems to have been lost:

Legend: top row is actual plate voltage, middle is voltage at the drop string, bottom row is the drop string R values

Okay, so here is what I have currently

-------------------------V3(260ish)------V2(200ish)------V1(190ish)
-----------430-------------420--------------316---------------310
300ohm----|----1kohm----|----22kohm----|----2.2kohm----|----150kFET

If I change the string, here is what I would expect

-------------------------V3(245ish)------V2(200ish)------V1(190ish)
-----------430---------------410--------------316---------------310
300ohm----|----3.3kohm----|----18kohm----|----2.2kohm----|----150kFET

So I have reduced the voltage to the PI without doing the same elsewhere. Now, why would I want to do that?

[greiswig]

The effect of decoupling the PI, for me, seems to be more important than the voltage.

Thanks, Scott! If you feel like it, I'd love to hear more. I'm here to learn.