Right now I'm reading this:
https://docs.kicad.org/6.0/en/getting_s ... kicad.html
It's link is from the KiCad forum. I paid 15 dollars donation (not required, the program is totally free), and downloaded version 6 on my laptop on 11/3/2022.
I have been working on a vintage bassman and wanted full documentation on anything I do to it. So I started learning how to build a schematic by using an ab165 schematic from the fender amp field guide. You know, the one nobody can hardly read?
Anyway, that's where I'm at. I plan on posting my progress.
Reason I'm doing this is because I feel more members on here would try it out if there was a thread showing a work in progress.
The schematic I'm building is most likely done wrong, but just by doing what I've done I have learned a few really cool features on the program. I certainly wish I would have done in sooner.
Once I learn how to do it I will post some attachments of the stuff I've done so far.
Any members on here with beginners advice, feel free to chime in.
![Smile :)](./images/smilies/icon_smile.gif)