Soldano kits

[JohnJankowski]

I’m not sure if this is the right place for this, but it’s a start.

I learn about tube amp architecture by building the occasional kit. I’ve built 3 kits, a Fender Deluxe Reverb, a Marshall JCM45 and just recently, a Hiwatt DR103 clone. After the Fender and Marshall kits, I’ve built clones and a few of my own designs, based on that knowledge. It’s been a fun hobby so far.

My latest, a Hiwatt clone, was a fun project. And to take things a step further, I’m considering a SLO 100 clone, as well.

Other than an outfit called Rosamps, I see no one else offering kits. At least that I’m aware of. So that’s my question…what are some sources for Soldano kits?

[Bobwith2Bs]

I'm not sure if it is still around or active but there used to be a "SloClone" forum.

[mhuss]

http://www.slocloneforums.com/index.php

[JohnJankowski]

Thanks. I did find that site and registered.

[xtian]

Andrea offers a nice PCB. Haven't built that one, but I've been very happy with his TW and Fender boards. https://www.aaelectronicspcb.com

[Roe]

Ceriatone offers kits and has DC heater.

Rosamp got ac heaters and too low voltages on the slo30

[johnnyreece]

Weber has a take on it, but it's not exactly the same. They use relays for switching, for one. They're also out of stock right now, but here's the info: https://www.tedweber.com/heather-c-kt/

Might be worth waiting for it to be in stock if price is an issue and the tariffs are hitting too hard (assuming you're in the US).

[syscokid]

Five years ago, I built a 50 watt SLO kit from C3 Amps with excellent results. C3 Amps is located in Texas, and the owner is Rob Reeder. It’s a one man operation and you can expect up to a week before you get a reply from Rob. IMO, it’s the best SLO kit out there, especially if authenticity is desirable.

http://www.c3amps.com/index.html

Mine…:

IMG_2498.jpeg

[M Fowler]

I recently bought another c3 SLO chassis and boards. He is not building cabs right now.

I also bought a KLD SLO 30 tranny set and boards. They are designing chassis now. The tranny set had such short wires so I told them that's not going to cut it. They use the Rosa layout and schematic.

20260323_155243.jpg

Weber 6sx chassis KLD boards

[Roe]

I am considering a SLO100 build, preferably with dual EQ.

Got tubes and transformers (120w, 2k OT; 345vac PT)

[johnnyreece]

How interesting. Must be Soldano season. I'm also working on a Soldano inspired build. My most challenging layout so far, for sure.

[BasementJames]

I am considering a SLO100 build, preferably with dual EQ.

Got tubes and transformers (120w, 2k OT; 345vac PT)

What transformers did you get? I'm also considering a Ceriatone kit, but I like to source my own transformers.

[Roe]

I am considering a SLO100 build, preferably with dual EQ.

Got tubes and transformers (120w, 2k OT; 345vac PT)

What transformers did you get? I'm also considering a Ceriatone kit, but I like to source my own transformers.

I've got dutch transformers from the Koch 120w powertone 2 amp (also used on 100w multitone, but with different taps for lower voltage)

[BasementJames]

Interesting, thanks!
I had never heard of that amp before.

[Roe]

Interesting, thanks!
I had never heard of that amp before.

Sorry, should be Koch, not Kock