Mustard capacitors sets and spares

List tube amp related items you wish to sell or trade. Private sales only. No dealers or manufactures.

Moderators: pompeiisneaks, Colossal

Post Reply
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Mustard capacitors sets and spares

Post by FranciscoPerez »

Hi everyone.

Given the big success of my previous thread about piher sets, I decided I could part with some mustards you guys seem to be using in your replicas and restorations. Those are 90% labelled bianchi, some philips are available too.
Do not hesitate to message me if interested.

Prices depend on value and availability, but as with pihers, I will keep them as reasonable as possible.
For instance, 2k2 400v caps are 3,5 eur each.

Shipping worldwide from Spain is very reasonable, tracked. I'm shipping to USA, Australia, Japan... all the time, at around 8 eur. Same with Europe.

All typical values available!!
Plenty of 22k, 10k, 2k2 @ 400v etc

Thank you!!
IMG_4871.jpg
IMG_4870.jpg
IMG_4869.jpg
IMG_4867.jpg
IMG_4866.jpg
IMG_4865.jpg
IMG_4864.jpg
IMG_4863.jpg
You do not have the required permissions to view the files attached to this post.
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Re: Mustard capacitors sets and spares

Post by FranciscoPerez »

I'm running out of 22k 400v, but still plenty of other values. I also hace 680k 160v chiclet capacitors for your ecc83 cathodes!!
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Re: Mustard capacitors sets and spares

Post by FranciscoPerez »

I'm back from vacation, and all values still available!
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Re: Mustard capacitors sets and spares

Post by FranciscoPerez »

Happy new year! All values still available.
lgehrig4
Posts: 239
Joined: Sun Aug 27, 2006 8:46 pm

Re: Mustard capacitors sets and spares

Post by lgehrig4 »

PM sent
lgehrig4
Posts: 239
Joined: Sun Aug 27, 2006 8:46 pm

Re: Mustard capacitors sets and spares

Post by lgehrig4 »

I purchased a set of mustard and piers from Francisco about 1-2 months ago. The 22K's are fine but the .1uf cap leads are too short to reach the turrets on a standard Marshall board. Just a heads up for anyone interested.

I found no need to reach out to Francisco since it obvious knew this when picking them. Perhaps this is expected in the industry but personally I expected caps that I can use in the amp I was building without having to solder additional wire to the leads. Just make sure you ask before buying.
tempImageYZauiS.gif
You do not have the required permissions to view the files attached to this post.
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Re: Mustard capacitors sets and spares

Post by FranciscoPerez »

Hi!! So sorry about that, I did not see your post here until today. I can offer a full refund or pick some for you that have longer leads, thought they would fit fine, my apologies. If you did not use them yet please pm me and we will work thing out.

I’m afraid I just check my PM regularly but did not checked this thread.

Fran
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Re: Mustard capacitors sets and spares

Post by FranciscoPerez »

Most values still available!!

I issued a full refund to lgehrig4, since I mistakenly thought we had discussed about the shorter leads for this specific capacitor value, and it was not the case.
Fran
User avatar
M Fowler
Posts: 14078
Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND

Re: Mustard capacitors sets and spares

Post by M Fowler »

Can I order
(2) jtm 50 sets
(2) superlative 100 sets

Mark

Mfowl7376@gmail.com
FranciscoPerez
Posts: 34
Joined: Thu Apr 04, 2024 9:33 am

Re: Mustard capacitors sets and spares

Post by FranciscoPerez »

Email sent! Thank you!
User avatar
chief mushroom cloud
Posts: 441
Joined: Tue Jan 18, 2005 5:42 pm
Location: Peenemunde CA

Re: Mustard capacitors sets and spares

Post by chief mushroom cloud »

PM sent Francisco
Don't overthink it. Just drink it.
Post Reply