Cathode Follower PA Driver question
Moderators: pompeiisneaks, Colossal
Re: Cathode Follower PA Driver question
I don't think that AB2 operation would be feasible if the power tubes were cathode biased; no reason it shouldn't sound fine though.stephenl wrote:Would this circuit also work in a cathode biased PA?
https://www.justgiving.com/page/5-in-5-for-charlie This is my step son and his family. He is running 5 marathons in 5 days to support the research into STXBP1, the genetic condition my grandson Charlie has. Please consider supporting him!
-
dorrisant
- Posts: 2769
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Cathode Follower PA Driver question
Old thread... new question.
Would there be any problem using the CFD with a cathodyne PI? As in a Princeton AA1164?
Would there be any problem using the CFD with a cathodyne PI? As in a Princeton AA1164?
You do not have the required permissions to view the files attached to this post.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
-
martin manning
- Posts: 14058
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Cathode Follower PA Driver question
Should be fine. The power stage is AC coupled same as it is with the LTP.
-
dorrisant
- Posts: 2769
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Cathode Follower PA Driver question
I thought so. Thanks Martin!martin manning wrote: ↑Sat Mar 01, 2025 9:09 am Should be fine. The power stage is AC coupled same as it is with the LTP.
"Education is what you're left with after you have forgotten what you have learned" - Enzo