Weschler Volt-pac variac

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
mrfreddieboy
Posts: 18
Joined: Thu Jun 27, 2013 2:01 am
Location: Ellicott City, MD

Weschler Volt-pac variac

Post by mrfreddieboy »

Hello,

My cheap variac is terrible and looking to get a U.S. made one. Is the Weschler one any good. I think I can get a refurbished one for not crazy money.
R.G.
Posts: 1862
Joined: Tue Dec 02, 2014 9:01 pm

Re: Weschler Volt-pac variac

Post by R.G. »

If you have time to shop, make up a list of acceptable models, then haunt facebook marketplace, craigslist, etc. for some good bargains.

I got my variac (Variac brand, even!), rated at 10A, for $40 at a surplus place. Just took some waiting. Sheer luck, and knowing ahead of time what would be good.
"For every complex problem there is an answer that is clear, simple, and wrong"
H. L. Mencken
nuke
Posts: 667
Joined: Tue Sep 17, 2024 6:59 pm
Location: Silicon Valley

Re: Weschler Volt-pac variac

Post by nuke »

I have a B&K 1655A unit that includes a meter, a safety-current-leakage detector and even a separately controlled outlet for a soldering iron, that I use with my thermal wire strippers.

Long discontinued, but really nice and you can find them on eBay and the like.
sluckey
Posts: 3864
Joined: Sun Jul 22, 2007 7:48 pm
Location: Mobile, AL
Contact:

Re: Weschler Volt-pac variac

Post by sluckey »

mrfreddieboy wrote: ↑Fri Oct 09, 2026 1:52 pm My cheap variac is terrible and looking to get a U.S. made one. Is the Weschler one any good. I think I can get a refurbished one for not crazy money.
That's a good brand.

I have a 10 amp Superior Powerstat 3PN116C Autotransformer made in USA. Very good quality. Plenty available on eBay. Expect to pay $100 to $150 for a good one. Powerstat is used by the military, FAA, and lots of industry. I highly recommend Powerstat.
...Steve
User avatar
mrfreddieboy
Posts: 18
Joined: Thu Jun 27, 2013 2:01 am
Location: Ellicott City, MD

Re: Weschler Volt-pac variac

Post by mrfreddieboy »

Thank you all!
Post Reply